SUMO เครื่องตัดท่ออัตโนมัติ รุ่น 11D
หมวดหมู่สินค้า: SUMO
รหัส :
สนใจติดต่อสอบถามเพิ่มเติม
เพิ่มเพื่อน

07 มิถุนายน 2564

ผู้ชม 25 ผู้ชม

 The machine can bevel up to 45° by selecting the required angle on the torch holder

 

รายละเอียด

เครื่องตัดท่ออัตโนมัติ รุ่น 11D SUMO

Automatic Pipe Cutter Model 11D SUMO

 

 

 

Standard Configuration

 

  • 1.Hose
  • 2.Bracket
  • 3.Cross feed handle
  • 4.Torch lift handle
  • 5.TOrch
  • 6.Guide wheel
  • 7.Big wing bolt
  • 8.Distributor
  • 9.Gear box connection
  • 10.Clutch handle
  • 11.Main base
  • 12.Chain

 

            

 

Autopipe-p (For Plasma)

 

  • The portable plasma pipe cutting machine is designed tp use plasma for high speed cutting of carbon of pipe and straight cut off of pipe in or out the field. (Torch holder to suit your Plasma Cutting Torch can be supplied as an optional attachment)

 

 

Features & benefits

 

  • Cutting can be done in clockwise or anti-clockwise direction from both sides of the machine
  • The machine can bevel up to 45° by selecting the required angle on the torch holder
  • The machine torch can be adjusted vertically and horizontally alongside the pipe surface by rack and pinion attachments
  • The model Autopipe-P can also be used to cut stainless Steel and other Non-ferrous pipes by using Plasma Cutting Torch (Torch holder to suit your Plasma Cutting Torch can be supplied as an optional attachment)
  • Remote Control Unit (1 set) supplied with the motorized version

 

 

Bevel Cutting

 

  • Beveling application with double connection Torch holder unit has 2 torch connections. The upper one (A) is for square cutting, The lower one (B) is for beveling, pls fix the torch for beveling as per the graduated bevel collar with 5° per division
  • Adjusling Length of Chain The length of the chain can be adjusted link by link, making it easy to match the chain to the circumference of the pipr. The number of liks required for a given job can be balculated as follows: Number of Links=Pipe Diameter x 1/10+13 (For millimeter: Pipe Diameter x 1+13; Round up to next link) (For inch: Pipe Diameter x 2.54+13; Round up to next link) Example of calculation: Number of links required for cutting Ø200mm pipe (200 x 1/10)+13=33 Additional chain links are available.

 

            

Engine by shopup.com